? 221 west industry court ? deer park, ny 11729-4681 ? phone (631) 586-7600 ? fax (631) 242-9798 ? ? world wide web - http://www.sensitron.com ? e-mail address - sales@sensitron.com ? sensitron __ semiconductor technical data data sheet 5093, rev. - hermetic axial lead rectifier description: a 200/400/600/800/1000 volt , 1 amp, 5000 nanosecond rectifier. max. ratings / electrical characteristics all ratings are at t a = 25 o c unless otherwise specified. rating conditions min typ max unit peak inverse voltage ss3611 ss3612 SS3613 ss3614 ss3957 - - - 200 400 600 800 1000 vdc average dc output current (i o ) t c = 100 o c t c = 150 o c - - 1.0 0.30 amps peak single cycle surge current (i fsm ) t p = 8.3 ms single half cycle sine wave, superimposed on rated load - - 30 amps(pk) operating and storage temp. (t op & t stg ) - -65 - +175 c maximum forward voltage (v f ) i f = 1.0a (300 sec pulse, duty cycle < 2%) - - 1.1 volts maximum instantaneous reverse current at rated (piv) t a = 25 c t a = 150 c - - 1.0 300 amps reverse recovery time (t rr ) i f = 0.5a, i r = 1.0a, i rr = 0.25a - - 5000 nsec thermal resistance (r jl ) - - - 38 c/w ss3611 ss3612 SS3613 ss3614 ss3957
? 221 west industry court ? deer park, ny 11729-4681 ? phone (631) 586-7600 ? fax (631) 242-9798 ? ? world wide web - http://www.sensitron.com ? e-mail address - sales@sensitron.com ? sensitron __ semiconductor technical data data sheet 5093, rev - mechanical dimensions: in inches / mm note: the cathode side is marked with a dark colored band on the diode body. ss3611 ss3612 SS3613 ss3614 ss3957 disclaimer: 1- the information given herein, including the specifications and dimens ions, is subject to change wi thout prior notice to impr ove product characteristics. before ordering, purchas ers are advised to contact the sensitron semiconductor sales department for the latest version of the datasheet(s). 2- in cases where extremely high reliabilit y is required (such as use in nuclear pow er control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety shoul d be ensured by using semic onductor devices that feature assured safety or by m eans of users? fail-safe precautions or other arrangement . 3- in no event shall sensitron semiconducto r be liable for any damages that may result from an accident or any other cause duri ng operation of the user?s units according to the datas heet(s). sensitron semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of informat ion, products or circuits described in the datasheets. 4- in no event shall sensitron semiconductor be liable for any fa ilure in a semiconductor device or any secondary damage result ing from use at a value exceeding the absolute maximum rating. 5- no license is granted by the datasheet(s ) under any patents or other rights of any third party or sensitron semiconductor. 6- the datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permissio n of sensitron semiconductor. 7- the products (technologies) de scribed in the datasheet(s) are not to be provi ded to any party whose purpose in their applica tion will hinder maintenance of international peace and safety nor are they to be ap plied to that purpose by their direct purchasers or any thir d party. when exporting these products (technolog ies), the necessary procedures are to be taken in accordance with related laws and regulatio ns. pkg. 101
|
